Knowledge About and Password Recovery Skill belongs to the IP address of the Class C network address, is reservations IP, devoted to the router settings. The password of this address will be different according to the router manufacturers’ set. But in general, User name: admin, password: admin. If you have modified the password, please enter the password which you modified, or you can reset the router administrator to obtain the password.

I lost my router password and how to recover?

It’s very simple, just reset the router.

How to reset a router?

Find a thin wire and insert it into the reset hole which behind the router. Hold about 10 seconds, when you see the router lights off and brighten again, release the reset hole, router reset completed.

How to set

Set the network address

Typically, landing address will normally be marked on the back of the router, some on the labels, which record the serial number of the router, also offered router address, user name and password.

Most of the router login address is “”

The majority of mainstream brand router(Without the wireless router), the default login address is

Setup steps

First step

Open a Web browser, input the IP address of the router (eg in the address bar and press Enter, Open the authentication dialog box, the router default administrator user name is admin, password is blank. Type admin in the “User Name” edit box and click “OK” button.

Second step

After login the management interface, in the “Home” tab, click the WAN button, Open the Internet options interface. Selected the PPPoE radio button, Then input such as provided by your ISP Internet accounts in the name of the PPPoE user name edit box, And output such as a password in the PPPoE user password “edit box.

Third step

Open the set interface, Click “Continue” button. Turn on the computer which connected to the router LAN port, it should connect the network now.

You may also have interet in

Frequently Asked Questions About

Can not connect

The reasons leading to this problem

1. The computer’s TCP/IP properties which used to configure the router settings are incorrect.

2. The router used in the existing network segment is same as the router’s LAN network.

3. The computer used to configure the router has several network cards, TCP/IP settings of network card are incorrect.


General configuration

Before configuring the router, we must configure the network properties of the computer which used to manage the router.

The following example of Windows XP to illustrate the computer’s TCP/IP configuration process:

1. Start the computer, right-click on the desktop or “Start” in the “My Network Places” choose “Properties”.

2. Right-click Local Area Connection “choose” Properties “, select “Internet Protocol (TCP/IP)” and click “Properties”.

3. The computer is set to “Obtain an IP address automatically” and “Obtain DNS server address automatically” and click “OK”.

4. Then right-click “local connection” select “status” view “support”.

5. Ping the connection between the computer and the router in the DOS command line.

a) Find the “Start” -> “Run”, type cmd, and click “OK” to open a DOS command line.

b) Enter “ping” in the command line and press Enter, if it displays “Reply from …” the computer and the router are connected.

c) If it displays other informations, such as “Request timed out”, it is indicated that the connections between the computer and the router have other problems. Check the Local Connection IP address and the router LAN IP, if they are not in the same network segment, you can configure an IP address manually. If this does not work, you can try to reset the router.